Case 445 Series III Tracks
The Case 445 Series III takes 450x86x58 rubber tracks (450 mm, about 18 in wide; 86 mm pitch; 58 links). An alternate size is 450x84x60.
8119.7lb weight
76.5hp
2500.1rated capacity
Fitment detail
| Configuration | Size | Width | Pitch | Links |
|---|---|---|---|---|
| Primary | 450x86x58 |
450 mm / ~18" | 86 mm | 58 |
| Alternate | 450x84x60 |
450 mm / ~18" | 84 mm | 60 |
Specifications and sources
| Spec | Value | Source |
|---|---|---|
| Primary track size | 450x86x58 | mclarenindustries.com |
| Alternate track sizes | 450x84x60 | mclarenindustries.com |
| Operating weight | 8119.7 lb | ritchiespecs.com |
| Engine power | 76.5 hp | ritchiespecs.com |
| Rated operating capacity | 2500.1 lb | ritchiespecs.com |
Tracks you can buy for the 445 Series III
Available tread patterns :
- Turf 2
- Block 1
- Zig Zag 1
- C 1
- Terrapin 1
- TDF 1
- Tdf Super Series 1
450x84x60 — 18" wide 2 options
| Tread | Duty | Price | Stock | From |
|---|---|---|---|---|
| Turf | — | — | unknown | mclarenindustries.com |
| Turf | — | — | unknown | mclarenindustries.com |
450x86x58 — 18" wide 6 options
| Tread | Duty | Price | Stock | From |
|---|---|---|---|---|
| Block | — | $1395.70 / each | unknown | mclarenindustries.com |
| Zig Zag | — | $1395.70 / each | unknown | mclarenindustries.com |
| C | — | $1395.70 / each | unknown | mclarenindustries.com |
| Terrapin | — | — | unknown | mclarenindustries.com |
| TDF | — | — | unknown | mclarenindustries.com |
| Tdf Super Series | — | — | unknown | mclarenindustries.com |
Available from
| Seller | Observed price | Options seen | Ships | Checked |
|---|---|---|---|---|
| mclarenindustries.com | $1395.70 / track | C, Block, Zig Zag (Maximizer) · unknown | not stated | 2026-08-19 |
These tracks also fit
22 other machines take the 445 Series III's primary size (450x86x58):
- Bobcat T830
- Bobcat T86
- Bobcat T870
- Case 435 Series III
- Case 450 Series III
- Case 75XT
- Case 85XT
- Case 90XT
- Gehl RT250
- Gehl RT255
- Gehl VT320
- John Deere 331G
- John Deere 333G
- Kubota SVL90-2
- Kubota SVL95
- Kubota SVL95-2
- Kubota SVL95-2s
- Kubota SVL97-2
- Mustang 2500RT
- Mustang 2550RT
- Mustang 3200VT
- Wacker Neuson ST50
Case track size chart: every model →
Undercarriage parts for the 445 Series III
| Component | Observed price | From | Checked |
|---|---|---|---|
| Track | $1395.70 | mclarenindustries.com | 2026-08-18 |
Before you order
Width, pitch, and link count must all match — measure your current tracks to confirm, and check your operator's manual for serial-number-specific variations.
Get notified when fitment data is added for the Case 445 Series III